| |
|
|
|
|
| |
|
|
|
|
| |
|
CEVA-TeakLite-III™ is a third-generation DSP architecture
based on the broadly adopted TeakLite family of DSP cores.
For the first time in the TeakLite DSP family, CEVA-TeakLite-III
delivers native 32-bit processing and a dual Multiply-Accumulate
(MAC) architecture, making the DSP ideal for deployment in
High Definition (HD) audio applications requiring advanced
audio standards such as Dolby Digital Plus 7.1, Dolby TrueHD
and DTS-HD Master Audio. Additional target applications for
CEVA-TeakLite-III include low-cost 2G/2.5G/3G wireless baseband
modems, wideband voice and audio processors, portable media
players, voice-over-IP residential gateways and dual mode
cellular/voice-over-WiFi handsets.
In addition to 32-bit processing power and a dual-MAC architecture,
CEVA-TeakLite-III features a 10-stage pipeline, enabling the
core to reach operating speeds higher than 550 MHz in a 65nm
process (worst-case conditions and process). Compared to CEVA-TeakLite,
initial performance show it to be up to 4 times faster on
basic operations and 2 times better on most popular audio
codecs.
For next-generation Hi-Fi audio applications, the CEVA-TeakLite-III
inherently supports 32-bit data processing functions with
multiple precision points and offers an enlarged 64-bit data
memory bandwidth. A FFT accelerator further boosts audio performance
and reduces power consumption.
3G multimode and portable audio applications are enhanced
through dual 16-bit multipliers, a built-in Viterbi accelerator
and a set of SIMD and parallel instructions. By utilizing
a 10-stage pipeline, the CEVA-TeakLite-III runs at 380MHz
in a 90nm G process and higher than 550 MHz in a 65nm G process,
using the worst-case corner.
Next-generation wireless and digital media devices require
larger program size, increased local frame buffers and efficient
multi-tasking. CEVA-TeakLite-III expands its predecessor's
addressable memory space by offering a 4 GB linear address
space for code and data memory. The core also offers a 32-bit
unified general purpose register bank and a 32-bit scalar
unit, with arithmetic, logical, bit manipulation and quick
look-up-table access capabilities, as well as a branch prediction
mechanism, to further enhance its micro-controller feature
set.
|
 |
|
| |
|
| |
|
| |
|
| |
| CEVA-TeakLite-III Product Note |
|
|
|
| |
|
| |
|
CEVA-TeakLite-III embeds the CEVA-Quark™ instruction set, a comprehensive
stand-alone 16-bit ISA that allows customers to develop complete
applications for cost-sensitive markets. Moreover, customers can
seamlessly mix CEVA-Quark instructions with more advanced instructions
without the need for mode switching. This enables better code density
for CEVA-TeakLite-III based designs and requires less memory, die
size and power as a result.
CEVA-TeakLite-III is fully compatible with the CEVA-TeakLite,
CEVA-TeakLite-II and Oak™
DSP architectures, allowing licensees to leverage both existing
applications and the large software install base already available
from CEVA and the CEVAnet™
third-party development community.
CEVA-TeakLite-III is a fully synthesizable soft core and a process-independent
design that allows licensees to specify the silicon area, power
consumption and speed that best suits their needs.
CEVA-TeakLite-III is a family of DSP cores, each configured to
target a specific application. Each core consists of a DSP engine,
configurable L1 memories and caches, and other system peripherals
and interfaces. Using application-specific configurations ensures
rapid deployment of the core and guarantees the performance in a
complete system. This also enables customers to balance performance
with die size in their target system-on-chip.
 |
CEVA-TL3210
|
CEVA-TL3211
|
|
CEVA-TeakLite-III Block Diagram
The CEVA-TeakLite-III is accompanied by the advanced Integrated Development
Environment (IDE) based Software Development Tools for embedded applications,
supporting Windows, Linux and Solaris operating systems, including
- Highly optimizing C compiler
- Macro assembler and linker
- Advance Graphic User Interface debugger and simulator
- Tight MATLAB bi-directional connectivity
- Integrated graphic application profiler
- Various utilities and converters
The deliverables include complete and fully automated reference design
implementation along with a verification & simulation environments. CEVA-TeakLite-III
design can also be ported to an FPGA for prototyping and system integration,
prior to taping out the actual silicon.
CEVA-TeakLite-III is backed up by a wide variety of software, applications
and algorithms available by CEVA and the CEVAnet
third party community.
|
pdf, 114kb)
4GB memory space